Konfigurasi RIP Version 2 pada CISCO

Routing Information Protocol (RIP) adalah sebuah protokol routing dinamis yang digunakan dalam jaringan LAN (Local Area Network) dan WAN (Wide Area Network).

Cara Kerja RIP:

KONFIGURASI ROUTER RIP versi 2

Contoh dengan IP

SBY                : int fa0/0 192.168.10.1, int se0/0/0 172.10.16.1

MDN               : int fa0/0 192.168.20.1, int se0/0/0 202.134.20.1

JKT                 : int fa0/0 192.168.40.1, int se0/0/0 172.10.16.2, int se0/0/1 202.134.20.2

Router SBY
SBY(config)#router rip
SBY (config-router)#version 2
SBY (config-router)#network 192.168.10.0
SBY (config-router)#network 172.10.16.0

SBY (config-router)#no auto-summary

SBY (config-router)#end

Router MDN
MDN(config)#router rip
MDN (config-router)#version  2
MDN (config-router)#network 192.168.20.0
MDN (config-router)#network 202.134.20.0

MDN (config-router)#no auto-summary

MDN (config-router)#end

Router JKT

JKT(config)#router rip
JKT (config-router)#version  2

JKT (config-router)#network 192.168.40.0
JKT (config-router)#network 172.10.16.0
JKT (config-router)#network 202.134.20.0

JKT (config-router)#no auto-summary          

JKT (config-router)#end

#sh ip route                                                     (melihat routing table, harus ada kode R)

#sh ip protocol                                                (melihat routing protocol di router kita)

#debug ip rip                                                   (melihat proses send-receive update RIP)

#terminal monitor                                            (untuk melihat debug, khusus bagi yang telnet)

Menghapus Konfigurasi RIP

(config)#no router rip

(config)#end

#copy run start